Tikhoff Damping TK1
Specifications
Description
TIKHOFF DAMPING TK1 is a high quality vibration damperfor controlling panel resonance and structure-borne vibration on doors, roofs, boot lids, and bonnet lids.
The updated model uses mastic for strong adhesion and consistent damping across a wide temperature range. Its semi-annealed, semi-hard aluminum foil uses a print finish designed to maintain integrity when rolled, while the no-bitumen construction supports a cleaner, more flexible installation.
This variant uses a more compact sheet format for straightforward handling and coverage planning.
Application
The material is installed at dry clean painted metal surface. Temperature in workroom must be from +18 to +30°С. Material is released from protective tint and is pressed carefully to work surface. Care should be taken to avoid air chambers in the material, which admit moisture and reduce insulation properties.
Do not install material on the dirty and on the corroded metal surface.
Products stored in a room at a temperature no higher than +40°C in the horizontal position on a flat surface at a distance of not less than 1 meter from the heating system in the conditions excluding moisture, oils and direct sunlight, stacked no more than 1 meter in height.
| Material Thickness | 2.3mm | |
| Sheets per Package | 15 | |
| Sheet Length | 80cm | |
| Sheet Width | 46cm | |
| Total Sheet Area | 3.68m² | |
| Package Contents | 15 sheets 80x46cm |