Tikhoff Sound Absorption
Specifications
Description
Lace is a flexible sound-absorbing material for reducing reflected and airborne noise inside vehicle cavities and trim areas. Its compressible format makes it practical for spaces where a rigid panel or sheet cannot follow the available shape.
The latex-impregnated acoustic foam is designed to work across a broad frequency range while remaining easy to place around complex surfaces. It can be compressed for tight installations and used as part of a layered cabin treatment.
This mid-profile variant uses an extended sheet format for broad coverage across larger treatment areas.
Properties
The material has very good flexibility that allows to use it on different surfaces while providing high vibration damping properties and heat insulation.
Composition
Short chain formed liquid polymer saturated polyurethane foam.
Application
Use for installation on doors, roof and interior panels of the car.
The material is installed at dry clean painted metal surface. Temperature in workroom must be from +18 to +30°С. Material is released from protective tint and is pressed carefully to work surface. Care should be taken to avoid air chambers in the material, which admit moisture and reduce insulation properties.
Do not install material on the dirty and on the corroded metal surface.
Storage
Products stored in a room at a temperature no higher than +40°C in the horizontal position on a flat surface at a distance of not less than 1 meter from the heating system in the conditions excluding moisture, oils and direct sunlight, stacked no more than 2.0 meter in height.
| Material Thickness | 15mm | |
| Dimension (W*L*H) | 100 x 50cm per sheet | |
| Sheets per Package | 20 | |
| Sheet Length | 100cm | |
| Sheet Width | 50cm | |
| Total Sheet Area | 5m² | |
| Package Contents | 20 sheets 90x50cm |